JQ.H0Cr21Ni10 Irhasi yentsimbi ekhuselekileyo ekhuselwe ngocingo oluqinileyo emgqomeni

JQ.H0Cr21Ni10 Stainless steel gas shielded solid welding wire in barrel Featured Image

1. Irhasi yokukhusela: Nika ingqalelo ekucocekeni kwegesi ekhuselayo, kunye nomlinganiselo womxube wegesi ocetyiswayo yi-Ar + 1-3% O2.

2. Ukuhamba kwegesi: 20-25L / min.

3. Ubude obomileyo: 15-25mm.

4. Susa ngokwenene i-rust layer, umswakama, ioli, uthuli, njl njl kwi-welding part.

5. Ngexesha le-welding yangaphandle, xa isantya somoya singaphezu kwe-1.5m/s, kufuneka kuthathwe amanyathelo okuthintela umoya, kwaye amanyathelo afanelekileyo okuthintela umoya kufuneka athathwe ukukhusela ukwenzeka kwemingxuma yokuvuthela.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

Isetyenziswa kakhulu kwi-petrochemical, inqanawa yoxinzelelo, oomatshini bokutya, izixhobo zonyango, izixhobo zesichumisi, oomatshini belaphu, i-reactor yenyukliya, njl., njenge-welding ye-12Cr18Ni9 (SUS 302), 06Cr19Ni10 (SUS 304) kunye nezinye izinto.

Ukwakheka kweekhemikhali zocingo lweWelding(Wt%)

Umzekelo	Ukwakhiwa kweekhemikhali zocingo lokuwelda (Wt%)
	C	Mn	Si	Cr	Ni	Mo	P	S	Cu
JQ.H0Cr21Ni10	0.035	1.80	0.31	20.15	9.52	0.03	0.013	0.008	0.34

Ukusebenza kwemveliso

Imodeli esemgangathweni ethobelayo (elinganayo).		Umzekelo weempawu ezibonakalayo zentsimbi egciniweyo (kunye ne-SJ601)
GB	AWS	I-Tensile StrengthMPa	Elongation%
S308	I-ER308	594	40.5

imveliso welding reference yangoku (AC okanye DC+)

Idayamitha yocingo(mm)		￠0.8	￠1.0	￠1.2
Welding current(A)	I-flat welding, i-welding ethe tye	70-150	100-200	140-220
	ukuwelda nkqo	50-120	80-150	120-180
	Ukuwelda ngaphezulu	50-120	80-150	160-200

IiNkcazo zeMveliso

Idayamitha yocingo	￠0.8	￠1.0	￠1.2
Ubunzima bephakheji	12.5Kg / iqhekeza	15Kg/iqhekeza	15Kg/iqhekeza

Imiqathango yokusetyenziswa kwemveliso

1. Irhasi yokukhusela: Nika ingqalelo ekucocekeni kwegesi ekhuselayo, kunye nomlinganiselo womxube wegesi ocetyiswayo yi-Ar + 1-3% O2.

2. Ukuhamba kwegesi: 20-25L / min.

3. Ubude obomileyo: 15-25mm.

4. Susa ngokwenene i-rust layer, umswakama, ioli, uthuli, njl njl kwi-welding part.

Ezi ngcebiso zingentla zezesalathiso kuphela, kwaye eyona meko iya kulawula kumsebenzi othile.Ukuba kuyimfuneko, ukufaneleka kwenkqubo kufuneka kuqhutywe ngaphambi kokumisela isicwangciso se-welding.

Ngaphambili: JQ.ER307 Irhasi yentsimbi ekhuselekileyo ekhuselwe ngocingo oluqinileyo olusemgqomeni

Okulandelayo: I-JQ.MH1Cr24Ni13 intsimbi yentsimbi engenamanzi entywiliselweyo

Bhala umyalezo wakho apha kwaye uwuthumele kuthi