JQ.H00Cr21Ni10T Irhasi yentsimbi ekhuselekileyo ekhuselwe ngocingo oluqinileyo emgqomeni

JQ.H00Cr21Ni10T Stainless steel gas shielded solid welding wire in barrel Featured Image

1. Irhasi yokukhusela: Nika ingqalelo ekucocekeni kwegesi ekhuselayo, kunye nomlinganiselo womxube wegesi ocetyiswayo yi-Ar + 1-3% O2.

2. Ukuhamba kwegesi: 20-25L / min.

3. Ubude obomileyo: 15-25mm.

4. Susa ngokwenene i-rust layer, umswakama, ioli, uthuli, njl njl kwi-welding part.

5. Ngexesha le-welding yangaphandle, xa isantya somoya singaphezu kwe-1.5m/s, kufuneka kuthathwe amanyathelo okuthintela umoya, kwaye amanyathelo afanelekileyo okuthintela umoya kufuneka athathwe ukukhusela ukwenzeka kwemingxuma yokuvuthela.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Isicelo

Ikakhulu kwi-CNG (igesi yendalo ecinezelekileyo), i-LNG (igesi yendalo engamanzi), i-LPG (i-petroleum gas enolwelo) intsimi yezixhobo zamandla ukuwelda izinto zentsimbi ezisetyenziswa kwiindawo ze-cryogenic kunye nobushushu obuphantsi;ezifana 12Cr18Ni9 (SUS 302), 06Cr19Ni10 (SUS 304), 022Cr18Ni9 (SUS 304L) ) welding.

Ukwakheka kweekhemikhali zocingo lweWelding(Wt%)

Umzekelo	Ukwakhiwa kweekhemikhali zocingo lokuwelda (Wt%)
	C	Mn	Si	Cr	Ni	Mo	P	S	Cu
JQ.H00Cr21Ni10T	0.023	1.63	0.40	20.12	10.35	0.03	0.013	0.009	0.16

Ukusebenza kwemveliso

Imodeli esemgangathweni ethobelayo (elinganayo).		Umzekelo weempawu ezibonakalayo zentsimbi egciniweyo (kunye ne-SJ601)
GB	AWS	I-Tensile StrengthMPa	Elongation%
S308L	ER308L	563	39.5

imveliso welding reference yangoku (AC okanye DC+)

Idayamitha yocingo(mm)		￠0.8	￠1.0	￠1.2
Welding current(A)	I-flat welding, i-welding ethe tye	70-150	100-200	140-220
	ukuwelda nkqo	50-120	80-150	120-180
	Ukuwelda ngaphezulu	50-120	80-150	160-200

IiNkcazo zeMveliso

Idayamitha yocingo	￠0.8	￠1.0	￠1.2
Ubunzima bephakheji	12.5Kg / iqhekeza	15Kg/iqhekeza	15Kg/iqhekeza

Imiqathango yokusetyenziswa kwemveliso

1. Irhasi yokukhusela: Nika ingqalelo ekucocekeni kwegesi ekhuselayo, kunye nomlinganiselo womxube wegesi ocetyiswayo yi-Ar + 1-3% O2.
2.Ukuhamba kwegesi: 20-25L / min.
3.Ubude obomileyo: 15-25mm.
4.Susa ngokwenene i-rust layer, ukufuma, ioli, uthuli, njl njl kwi-welding part.
5. Ngexesha le-welding yangaphandle, xa isantya somoya singaphezulu kwe-1.5m/s, amanyathelo okuthintela umoya kufuneka athathwe, kwaye amanyathelo afanelekileyo okuthintela umoya kufuneka athathwe ukuthintela ukwenzeka kwemingxuma yokuvuthela.
Ezi ngcebiso zingentla zezesalathiso kuphela, kwaye eyona meko iya kulawula kumsebenzi othile.Ukuba kuyimfuneko, ukufaneleka kwenkqubo kufuneka kuqhutywe ngaphambi kokumisela isicwangciso se-welding.